Hyppocoat 100

Black Pearl® Waterproofing System is composed of two primary products: Black Pearl® Adhesive Black Pearl® Sheet Membrane These components are based upon the same core formula of select, unoxidized asphalt cement base, butyl rubber, styrene isoprene styrene (SIS), neoprene rubber, styrene-butadiene-styrene rubber (SBS), fillers, plasticizers and curing agents. The Black Pearl® Adhesive also has an aliphatic solvent that is within acceptable OSHA and EPA current regulations. Black Pearl® Sheet Membrane is a 55 mil woven polyester fabric providing extra tensile strength and stability. This fabric is impregnated and coated with the Black Pearl® rubberized formula. The compatibility between the two components is 100 percent, with the Black Pearl® Adhesive acting as a catalyst on the sheets and chemically fusing the system elements together (including flashings) into a thick, semi-monolithic waterproof membrane. Black Pearl® Waterproofing System has the unique ability to be applied to green and damp concrete. It is also compatible with asphaltic products, enabling the restoration of projects that were originally asphaltic based and ties to hot rubberized asphalt. It can be applied at temperatures as low as 0ºF. USES: New and restoration applications Plaza deck waterproofing systems Protected membrane roofs (IRMA®)* Green Roof Roofscapes® Vertical waterproofing applications Parking decks, bridges, water treatment plants Between slab waterproofing membrane systems COVERAGE: BP Membrane: 39.5″x66′ = 217 sq ft BP Primer Adhesive: 1 pail / 225 sq ft (approx) **Coverage may vary depending on substrate PACKAGING: BP Primer Adhesive 5-gallon pails (4.75 gallons per pail) 42 lbs per pail 36 pails per pallet BP Membrane 39.5”x66’ 53 lbs per roll 20 rolls per pallet | HyppoCoat 100 is an aliphatic, two-component, fast-setting, rapid-curing, solvent-free*, high-performance, and high-solids polyurea/urethane polymer waterproof coating that can be utilized suitably for heavy-duty wearing surface applications on prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, HyppoCoat 100 is suitable for applications in temperatures as low as 20°F. HyppoCoat 100 is also relatively insensitive to moisture and temperature, allowing for applications in various temperatures and humidity. HyppoCoat 100 may be used as a stand-alone application for flooring, pedestrian and vehicular parking deck applications. USES: • Vehicular Parking Decks • Exterior & Interior Waterproofing Traffic Areas • Walkways, Patios and Stairways • Porticos & Sun Rooms • Metal Roofs • Mechanical Rooms • Heavy Elastomeric Duty Flooring • Basketball Courts • Precast Joints • Block and Masonry • Curtain Walls FEATURES & BENEFITS: • Applied at any thickness in one application • Excellent Weathering • Seamless • Labor Saving • May be applied at any thickness in one pass • Meets the Criteria of ASTM C-836 & E-96 • Non-Gassing • User Friendly • Fast Curing (1-4 hours) • Resists Dirt Attraction • Good Thermal Stability • Highly Flexible over extreme temperatures • No Odor • Recoatable • Meets SCAQMD VOC Requirements • Excellent Low Temperature Flexibility COVERAGE: 1 mil = 1520 Sq Ft/Gal *HyppoCoat 100 may be applied at any rate to achieve desired thickness. PACKAGING: 5 Gallon Kit Part A = 5 Gal Pail Part B = 1 Gal Pail 1 Gallon Kit Part A = 1 Gal Pail Part B = 1 Qt Can https://www.barrettroofs.com/product/hyppocoat-100/