HyppoCoat 100™ Trafficable Base Membrane

Black Pearl® Cold Fluid Applied Rubberized Asphalt Roofing & Waterproofing System Black Pearl® is a cold sheet applied rubberized asphalt waterproofing system that is composed of two primary products: Black Pearl® Adhesive Black Pearl® Sheet Membrane Uses: New and restoration applications Plaza deck waterproofing systems Protected membrane roofs (IRMA®)* Green Roof Roofscapes® Vertical waterproofing applications Parking decks, bridges, water treatment plants Between slab waterproofing membrane systems Black Pearl® Adhesive utilizes a core formula of select, unoxidized asphalt cement base, butyl rubber, styrene isoprene styrene (SIS), neoprene rubber, styrenebutadiene- styrene rubber (SBS),fillers, plasticizers and curing agents. Black Pearl® Adhesive also has an aliphatic solvent that is within acceptable OSHA and EPA current regulations. Unlike similar waterproofing membranes reinforced with glass fabric, the 55-mil Black Pearl® Sheet Membrane is made with FSC Textbond® spunbond polyester that is reinforced with integral longitudinal fiberglass strands set 3/8” apart in the machine direction. This synergistic combination provides polyester’s well known elastic elongation, puncture and tear resistance with the tensile strength and stability of fiberglass. Black Pearl® Sheet Membrane has been impregnated on both sides with the same Black Pearl® rubberized formula as its adhesive counterpart, which is protected by a peelable polyethylene release liner allowing for the unique benefit of complete walkability during application. The compatibility between the two components is 100 percent, with the Black Pearl® Adhesive acting as a catalyst on the sheets and chemically fusing the system elements together (including flashings) into a thick, semi-monolithic waterproof membrane. Black Pearl® (BP) Waterproofing System has the unique ability to be applied to green and damp concrete. It is also compatible with asphaltic products enabling restoration of project that were originally asphaltic based and ties to hot rubberized asphalt. It can be applied at temperatures as low as 0ºF. | HyppoCoat 100™ Hybrid Polyurea / Polyurethane Trafficable Base Membrane HyppoCoat 100 is an aliphatic two component, fast-setting, rapid-curing, solvent-free, high-performance, and high-solids polyurea/urethane polymer waterproof coating that can be utilized suitably for heavy-duty wearing surface applications on prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, HyppoCoat 100 is suitable for applications in temperatures as low as 20°F. It is also relatively insensitive to moisture and temperature, allowing for applications in various temperatures and humidity. HyppoCoat 100 may be used as a stand-alone application for flooring, pedestrian and vehicular parking deck applications, as well as a membrane for waterproofing applications. Uses Vehicular Parking Decks Exterior & Interior Waterproofing Traffic Areas Walkways, Patios and Stairways Porticos & Sun Rooms Metal Roofs Mechanical Rooms Heavy Duty Elastomeric Flooring Basketball Courts Pre-cast Joints Block and Masonry Curtain Walls On Grade or Split slab Features & Benefits Applied at any thickness in one application Excellent Weathering Seamless Labor Saving Non-Gassing User Friendly Fast Curing (1-4 hours) Resists Dirt Attraction Good Thermal Stability Highly Flexible over extreme temperatures No Odor Recoatable Meets SCAQMD VOC Requirements Excellent Low Temperature Flexibility Learn more: https://www.barrettroofs.com/product/hyppocoat-100/