HDP1200 SERIES

The HDP1200 series of A/V&ITE and medical grade AC-DC power supplies provide the compact form factor and high efficiency that the marketplace demands. The series provides a steady 1200 W of regulated DC power through the 180 to 305 VAC input range, all in a 4.2 x 8.1 x 1.6” form factor. The HDP1200 comes in an enclosed chassis with a built-in front mounted fan to facilitate system integration. By converting energy at typical 95% efficiency, the HDP1200 generates less heat, facilitating optimal thermal management in space constrained environments, resulting in very high reliability. The series comes in 24, 48 VDC standard output voltages. It offers a +5 VDC stand-by output capable of 1.5 A. Available control signals include Power Good (P_OK), Remote On / Off (PS_Inhibit) and Sense Terminals (RS+, RS-). The HDP1200 features a built-in I-share circuit for parallel operation between power units to enhance total power. The front-mounted fan rotation speed is digitally controlled to guarantee the minimum required airflow, minimizing audible noise for quiet operation, and enhancing the power supply service lifetime. Protection features include High Breaking capacity fuses on both AC lines, input under voltage lockout (IUV), output over-current (OC), output short-circuit (SC), output over-voltage (OV) and over-temperature (OT). The series complies with IEC 60601-1 safety standard for medical equipment, offers 2x MoPP means of patient protection, and is suitable for BF rated medical equipment. The series also complies with the latest edition of the IEC 62368-1 standards for Audio Video and IT equipment and UL8750 for LED lighting applications. The series meets the EN55032 EMC limits of Class B for conducted and radiated emissions as well as the IEC/EN 61000-3 for flicker and harmonics content. The series also comply with the immunity standards: IEC/EN 61000-6-2, IEC/EN 60601-1-2 4th edition, and EN 55024. | The medical grade MDP1200 series of AC-DC power supplies offer increased embedded power in three (3) compact 1U compatible packages, high energy efficiency and wide versatility. The series provides a steady 1200 W of regulated DC power through 180-305 V AC and 1000 W through 85-137 V AC input voltage ranges in a single output of 24 or 48 V DC . The MDP1200 series is available in three (3) compact 1U height compatible packages; one, enclosed with a built-in front mounted pair of fans and two (available only 24V variant), U-shaped chassis with or without protective cover, to facilitate system integration. By converting AC power at a 94% typical efficiency rate, the MDP1200 series generates very little heat allowing for optimal thermal management. The series offers a 12 V DC , 0.5 A and a 5 V DC , 1 A stand-by outputs and the full set of protection features including high breaking capacity fuses on both AC lines, input under voltage lockout (IUV), output over-current (OC), output short-circuit (SC), output over-voltage (OV) and over-temperature (OT). The MDP1200 series supports digital power management over the PMBus™ communications protocol enabling interoperation with and easy integration into a system. In addition, analogue control signals include Power Good (P_OK), Remote On / Off (+/-PS_Inhibit) and Sense terminals (RS + , RS - ). Multiple MDP1200 units may be used in parallel mode for redundancy and / or higher power, made possible with the internal OR-ing and current sharing functions. The dual front-mounted fan version provides the full output rated power up to 60 °C. Its fan rotation speed is digitally controlled to guarantee the minimum required airflow, minimizing audible noise for quiet operation, and enhancing the power supply service life time. Rated power is also achieved in the U-chassis variants, with or without perforated cover, when providing them with an 800 LFM airflow from top side up to 55 °C. All variants can be operated up to 70 °C de-rating the output power. The MDP1200 series complies with the 3 rd edition of the IEC60601-1 and ANSI/AAMI ES/EN 60601-1 safety standards for medical equipment requiring 2x MoPP protection grade. It is suitable for BF rated medical equipment under specific conditions. The MDP1200 series meets the EN 60601-1-2 EMC limits of Class B for conducted and radiated emissions as well as the IEC/EN61000-3 for flicker and harmonics content. It also meets the IEC 60601-1-2 4 th edition for EM immunity.